• order_desk@srkgolf.com
  • /
  • 204-237-3132 | 1-877-740-3132
  • /

Pinhawk Vertex Dual Length Iron Clubhead

Pinhawk Vertex Dual Length Iron Clubhead

$30.95$45.95

Clear
SKU: VIH3746A Categories: , Tags: , Brand:

Description

Look to simplify your iron game with the Pinhawk Vertex. Not completely single length, and not traditional length. Instead, these have two different lengths: the 3, 4 and 5 irons are one length, and the 6-iron through wedges are another. This configuration results in no distance loss in the long irons and the full benefits of single length irons in the “short” set (6-SW). 2 different lengths, and just 2 swing planes, vs many planes in a traditional set. The 3 and 6 iron use a new iron technology necessary for correct distance gapping across the entire set. First, they have an ultra-thin, high strength cup face to help increase ball speed and maximize distance. The weight saved by the thinner face is positioned to allow for an optimal launch angle. This is a hollow bodied design that provides unparalleled forgiveness and distance. The suggested men’s length for the Pinhawk Vertex is 38″ (for the 3, 4 and 5 irons) and 36.5″, which are a typical 5 and 8 iron lengths respectively.

 

MODERN DAY GAME IMPROVEMENT

Look to simplify your iron game with the Pinhawk Vertex. Not completely single length, and not traditional length. Instead, these have two different lengths: the 3, 4 and 5 irons are one length, and the 6-iron through wedges are another.

NEW IRON TECHNOLOGY

The 3 and 6 iron use a new iron technology necessary for correct distance gapping across the entire set. First, they have an ultra-thin, high strength cup face to help increase ball speed and maximize distance. The weight saved by the thinner face is positioned to allow for an optimal launch angle. This is a hollow bodied design that provides unparalleled forgiveness and distance.

For Clubmakers
Assembly Instructions and Tips for the Pinhawk Vertex Dual Length Irons
These irons are assembled differently from all other irons we carry because the head weights don’t progress like a normal set. These are Dual Length irons. When you get done, the lower lofted (#3, #4, #5 irons) will be the exact same length with the only change being the loft. While the #6-iron – Wedges are a separate length.For the #3, #4 and #5 Irons
Tip trim the shaft, regardless of the head, as if it were a #5-iron. Cut the butt-end to length as if it were a 5-iron. If someone orders a set +1/2”, then make that length ½” over our standard #5-iron length.

For the #6-9 iron and Wedges
Tip trim the shaft, regardless ff the head, as if it were an #8-iron. Cut the butt-end to length as if were an 8-iron. If someone orders a set +1/2”, then make that length ½” over our standard #8-iron length.*Note that Pinhawk is a trademarked line of golf clubs not designed by Hireko Golf.

Model # Hand Club Loft Lie Weight Offset Bounce Length Hosel
VIH3746A-003 RH #3 18.5° 62° 254 7.6 mm 38″ 0.370″
VI3746A-004 RH #4 22° 62° 254 7.2 mm 38″ 0.370″
VI3746A-005 RH #5 26° 62° 254 6.8 mm 38″ 0.370″
VIH3746A-006 RH #6 28.5° 63.5° 275 4.8 mm 36.5″ 0.370″
VI3746A-007 RH #7 31.5° 63.5° 275 4.8 mm 36.5″ 0.370″
VI3746A-008 RH #8 35.5° 63.5° 275 4 mm 36.5″ 0.370″
VI3746A-009 RH #9 40° 63.5° 275 3.5 mm 36.5″ 0.370″
VI3746A-10P RH PW 45° 63.5° 275 2.9 mm 36.5″ 0.370″
VI3746A-15A RH AW 50° 63.5° 275 1 mm 36.5″ 0.370″
VI3746A-20S RH SW 55° 63.5° 275 1 mm 12° 36.5″ 0.370″