Component Heads – SRK Golf https://srkgolf.com Up Your Game Sat, 06 Apr 2024 17:24:34 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.4 https://srkgolf.com/wp-content/uploads/2020/03/cropped-srkf-1-32x32.png Component Heads – SRK Golf https://srkgolf.com 32 32 Acer XV Pro Iron Clubhead https://srkgolf.com/product/acer-xv-pro-iron-clubhead/ Sat, 27 Feb 2021 03:55:41 +0000 https://srkgolf.com/?post_type=product&p=5270 The XV Pro features the same cutting edge design as the standard, but with a more compact design and reduced offset favored by better players. The XV Pro model also has a slightly narrower sole and thinner topline.

INSTILL CONFIDENCE INTO YOUR GAME

The Acer XV irons available in 3 models: The XV standard version features ample offset to help player square up the face at impact. The HT has nearly a 30% wider sole and offer more forgiveness. The XV Pro has a more compact design, and reduced offset favored by better players.

PERIMETER-WEIGHTED REDUCED OFFSET

You don’t have to be a pro to play these irons. This is a very forgiving iron simply with less offset than most game-improvement irons on the market today.

TAKE DIRECT AIM AT THE FLAG

Deep undercut cavity and enhanced heel-toe weighting enables golfers to hit both straighter and more solid shots.

Specifications

Model # Hand Club Loft Lie Weight Offset Bounce Std Length Hosel ID
I3720A-004 RH #4 23° 60.5° 249 3.0 mm 3° 38.5″ 0.370″
I3720A-005 RH #5 26° 61.5° 256 2.8 mm 4° 38″ 0.370″
I3720A-006 RH #6 29° 62° 263 2.6 mm 5° 37.5″ 0.370″
I3720A-007 RH #7 33° 62.5° 270 2.4 mm 6° 37″ 0.370″
I3720A-008 RH #8 37° 63° 277 2.2 mm 7° 36.5″ 0.370″
I3720A-009 RH #9 41° 63.5° 284 2.0 mm 8° 36″ 0.370″
I3720A-10P RH PW 45° 64° 291 1.8 mm 9° 35.5″ 0.370″
I3720A-15A RH GW 50° 64° 291 1.6 mm 10° 35.5″ 0.370″
I3720A-20S RH SW 55° 64° 298 1.3 mm 12° 35.25″ 0.370″
]]> Acer XV HT Iron Clubhead https://srkgolf.com/product/acer-xv-ht-iron-clubhead/ Sat, 27 Feb 2021 03:46:08 +0000 https://srkgolf.com/?post_type=product&p=5256 The HT (High Trajectory) has nearly a 30% wider sole and shallower face than our standard Acer XV model to get up in the air quickly from virtually any lie with maximum forgiveness. HT version is favored by beginners, slower swingers and golfers who tend to sweep the ball off of the ground.

INSTILL CONFIDENCE INTO YOUR GAME

The Acer XV irons available in 3 models: The XV standard version features ample offset to help player square up the face at impact. The HT has nearly a 30% wider sole and offer more forgiveness. The XV Pro has a more compact design, and reduced offset favored by better players.

HIGHER LAUNCH

Deep undercut cavity and shallower face height create a higher launch angle and maximum forgiveness.

TAKE AIM AT THE FLAG

The longer blade length and ample offset enables golfers to hit both straighter and more solid shots.

Specifications

Model # Hand Club Loft Lie Weight Offset Bounce Std Length Hosel ID
I3719A-004 RH #4 23° 61° 249 7.5 mm 0° 38.5″ 0.370″
I3719A-005 RH #5 26° 62° 256 7 mm 0° 38″ 0.370″
I3719A-006 RH #6 29° 62.5° 263 6.8 mm 1° 37.5″ 0.370″
I3719A-007 RH #7 33° 63° 270 6.5 mm 2° 37″ 0.370″
I3719A-008 RH #8 37° 63.5° 277 6 mm 3° 36.5″ 0.370″
I3719A-009 RH #9 41° 64° 284 5.5 mm 4° 36″ 0.370″
I3719A-10P RH PW 45° 64° 291 5 mm 5° 35.5″ 0.370″
I3719A-15A RH GW 50° 64° 291 4.8 mm 5° 35.5″ 0.370″
I3719A-20S RH SW 55° 64° 298 4.5 mm 12° 35.25″ 0.370″
]]> Pinhawk Vertex Dual Length Iron Clubhead https://srkgolf.com/product/pinhawk-vertex-dual-length-iron-rh-3-6-clubhead/ Fri, 08 May 2020 03:29:54 +0000 https://srkgolf.com/?post_type=product&p=2580 Available by Special Order. Please Allow 2-3 Weeks for Delivery

 

Look to simplify your iron game with the Pinhawk Vertex. Not completely single length, and not traditional length. Instead, these have two different lengths: the 3, 4 and 5 irons are one length, and the 6-iron through wedges are another. This configuration results in no distance loss in the long irons and the full benefits of single length irons in the “short” set (6-SW). 2 different lengths, and just 2 swing planes, vs many planes in a traditional set. The 3 and 6 iron use a new iron technology necessary for correct distance gapping across the entire set. First, they have an ultra-thin, high strength cup face to help increase ball speed and maximize distance. The weight saved by the thinner face is positioned to allow for an optimal launch angle. This is a hollow bodied design that provides unparalleled forgiveness and distance. The suggested men’s length for the Pinhawk Vertex is 38″ (for the 3, 4 and 5 irons) and 36.5″, which are a typical 5 and 8 iron lengths respectively.

 

MODERN DAY GAME IMPROVEMENT

Look to simplify your iron game with the Pinhawk Vertex. Not completely single length, and not traditional length. Instead, these have two different lengths: the 3, 4 and 5 irons are one length, and the 6-iron through wedges are another.

NEW IRON TECHNOLOGY

The 3 and 6 iron use a new iron technology necessary for correct distance gapping across the entire set. First, they have an ultra-thin, high strength cup face to help increase ball speed and maximize distance. The weight saved by the thinner face is positioned to allow for an optimal launch angle. This is a hollow bodied design that provides unparalleled forgiveness and distance.
For Clubmakers
Assembly Instructions and Tips for the Pinhawk Vertex Dual Length Irons
These irons are assembled differently from all other irons we carry because the head weights don’t progress like a normal set. These are Dual Length irons. When you get done, the lower lofted (#3, #4, #5 irons) will be the exact same length with the only change being the loft. While the #6-iron – Wedges are a separate length.For the #3, #4 and #5 Irons
Tip trim the shaft, regardless of the head, as if it were a #5-iron. Cut the butt-end to length as if it were a 5-iron. If someone orders a set +1/2”, then make that length ½” over our standard #5-iron length.For the #6-9 iron and Wedges
Tip trim the shaft, regardless ff the head, as if it were an #8-iron. Cut the butt-end to length as if were an 8-iron. If someone orders a set +1/2”, then make that length ½” over our standard #8-iron length.*Note that Pinhawk is a trademarked line of golf clubs not designed by Hireko Golf.

Model # Hand Club Loft Lie Weight Offset Bounce Length Hosel
VIH3746A-003 RH #3 18.5° 62° 254 7.6 mm 0° 38″ 0.370″
VI3746A-004 RH #4 22° 62° 254 7.2 mm 1° 38″ 0.370″
VI3746A-005 RH #5 26° 62° 254 6.8 mm 2° 38″ 0.370″
VIH3746A-006 RH #6 28.5° 63.5° 275 4.8 mm 4° 36.5″ 0.370″
VI3746A-007 RH #7 31.5° 63.5° 275 4.8 mm 4° 36.5″ 0.370″
VI3746A-008 RH #8 35.5° 63.5° 275 4 mm 5° 36.5″ 0.370″
VI3746A-009 RH #9 40° 63.5° 275 3.5 mm 6° 36.5″ 0.370″
VI3746A-10P RH PW 45° 63.5° 275 2.9 mm 8° 36.5″ 0.370″
VI3746A-15A RH AW 50° 63.5° 275 1 mm 9° 36.5″ 0.370″
VI3746A-20S RH SW 55° 63.5° 275 1 mm 12° 36.5″ 0.370″
]]> Pinhawk SL (Single Length) Iron Clubhead https://srkgolf.com/product/pinhawk-sl-single-length-iron-rh-clubhead/ Fri, 08 May 2020 03:14:07 +0000 https://srkgolf.com/?post_type=product&p=2576

Limited Stock Available. Please Allow 2 – 3 Weeks For Delivery

Looking for more consistency from your iron game? You need to seriously consider the Pinhawk SL single length irons! They are extremely popular for a reason. Contrary to a traditional set of irons, the SL’s are all designed to be the same length throughout the entire set. In addition, the swingweight and flex are also the same. This allows the golfer to use the same swing, on the same plane, with the same feel, for each iron in the set. The loft gapping is slightly larger than traditional irons; this is to maintain a proper distance gap between clubs. The suggested men’s length for the Pinhawk SL’s is 37″, which is a typical 7 iron length.

ONE LENGTH. ONE SWING.

Looking for more consistency from your iron game? You need to seriously consider the Pinhawk SL single length irons! They are extremely popular for a reason. Contrary to a traditional set of irons, the SL’s are all designed to be the same length throughout the entire set.

SAME SWING PLANE

In addition, the swingweight and flex are also the same. This allows the golfer to use the same swing, on the same plane, with the same feel, for each iron in the set.

Specifications

Available in RH Only

Model # Hand Club Loft Lie Weight Offset Bounce Std Length Hosel ID
VI3661-004 RH #4 20° 62.5° 272 3 mm 3° 37″ 0.370″
VI3661-005 RH #5 25° 62.5° 272 3 mm 3° 37″ 0.370″
VI3661-006 RH #6 30° 62.5° 272 3 mm 3° 37″ 0.370″
VI3661-007 RH #7 35° 62.5° 272 3 mm 3° 37″ 0.370″
VI3661-008 RH #8 39° 62.5° 272 3 mm 3° 37″ 0.370″
VI3661-009 RH #9 43° 62.5° 272 3 mm 3° 37″ 0.370″
VI3661-10P RH PW 47° 62.5° 272 3 mm 3° 37″ 0.370″
VI3661-15G RH GW 51° 62.5° 272 3 mm 6° 37″ 0.370″
VI3661-20S RH SW 55° 62.5° 272 3 mm 12° 37″ 0.370″
VI3661-30L RH LW 59º 62.5° 272 3 mm 6° 37″ 0.370″
]]> Pinhawk SLH (Single Length) Hybrid Clubhead https://srkgolf.com/product/pinhawk-slh-single-length-hybrid-clubhead/ Fri, 08 May 2020 03:02:43 +0000 https://srkgolf.com/?post_type=product&p=2570
The Pinhawk SLH single-length hybrids offer a unique choice in single-length technology for players looking for consistent ball striking. Golfers of all handicaps can benefit by using these hybrids that are specifically designed to all be played at the same length. You also can mix and match the Pinhawk SLH Hybrids with the Pinhawk SL irons too. Contrary to traditional hybrids that vary in length, the SLH hybrids are all designed to be the same length throughout the entire set and have the exact same swingweight and flex, so the golfer only has to “learn” one swing that works for him or her. This enables the golfer’s swing to become more easily repeatable. The suggested men’s length for the Pinhawk SL’s is 37″(steel), which is a typical 7 iron length. The Pinhawk SLH Hybrids conform to the Rules of Golf.

 

ONE LENGTH. ONE SWING.

The Pinhawk SLH single-length hybrids offer a unique choice in single-length technology for players looking for consistent ball striking. Golfers of all handicaps can benefit by using these hybrids that are specifically designed to all be played at the same length.

LOOKING FOR MORE CONSISTENCY?

It is simple. Your ball position stays the same, your stance stays the same and your spine angle stays the same to provide consistency.

EASY LAUNCH

You’ll find the low center of gravity gets the ball up quickly and easily. These can also be mixed and matched with the matching Pinhawk SL irons.

Specifications

Model # Hand Club Loft Lie Weight Offset Bounce Volume Std Length Hosel ID
VIW1289AU-004 RH #4 20° 62.5° 272 -3 mm 108 cc 37″ 0.370″
VIW1289AU-005 RH #5 25° 62.5° 272 -3 mm 108 cc 37″ 0.370″
VIW1289AU-006 RH #6 30° 62.5° 272 -3 mm 108 cc 37″ 0.370″
VIW1289AU-007 RH #7 35° 62.5° 272 -3 mm 108 cc 37″ 0.370″
VIW1289AU-008 RH #8 39° 62.5° 272 -3 mm 108 cc 37″ 0.370″
VIW1289AU-009 RH #9 43° 62.5° 272 -3 mm 108 cc 37″ 0.370″
VIW1289AU-10P RH PW 47° 62.5° 272 -3 mm 108 cc 37″ 0.370″
VIW1289AU-15A RH AW 51° 62.5° 272 -3 mm 108 cc 37″ 0.370″
VIW1289AU-20S RH SW 55° 62.5° 272 -3 mm 108 cc 37″ 0.370″
VIWL1289AU-004 LH #4 20° 62.5° 272 -3 mm 108 cc 37″ 0.370″
]]> Pinhawk SLF (Single Length) Fairway Wood Clubhead https://srkgolf.com/product/pinhawk-slf-single-length-fairway-wood-rh-clubhead/ Fri, 08 May 2020 02:51:57 +0000 https://srkgolf.com/?post_type=product&p=2566
The Pinhawk SLF single-length fairway woods are for single length players to complement the Pinhawk Irons and/or Pinhawk Hybrids. Golfers of all handicaps can benefit by using these fairways that are specifically designed so they all can be played at the same length (same as a 5-wood). Fine-tuned perimeter weighting also gives these woods maximum forgiveness. You’ll find the low center of gravity gets the ball up quickly and easily with a perfect trajectory. Your ball position stays the same, your stance stays the same, and your spine angle stays the same. Same proven single-length technology, with the same swing on the same plane, with the same feel for each fairway wood. Now you can have not only more consistency in your iron play, but also more consistency in your fairway wood play. Testing has proven that the loft gapping on the Pinhawk SLF to be a perfect 4 degrees between clubs. The Pinhawk SLF fairways conform to the Rules of Golf.

 

ONE LENGTH. ONE SWING.

The Pinhawk SLF single-length fairway woods are for single length players to complement the Pinhawk Irons and/or Pinhawk Hybrids. Golfers of all handicaps can benefit by using these fairways that are specifically designed so they all can be played at the same length (same as a 5-wood).

EXTRA FORGIVENESS

The larger footprint gives these woods maximum forgiveness.

FAIRWAY-FRIENDLY

You’ll find the low center of gravity gets the ball up quickly and easily from fairway lies.

Specifications

Model # Hand Club Loft Lie Weight Face Angle Face Height Volume Std Length Hosel ID
VM13583-003 RH #3 16° 59° 220 0° Square 32 mm 180 cc 42″ 0.335″
VM13583-005 RH #5 20° 59° 220 0° Square 32 mm 165 cc 42″ 0.335″
VM13583-007 RH #7 24° 59° 220 0° Square 32 mm 160 cc 42″ 0.335″
]]> Dynacraft Prophet Muscle Blade Iron Clubhead https://srkgolf.com/product/dynacraft-prophet-muscle-blade-iron-rh-clubhead/ Wed, 06 May 2020 14:27:09 +0000 https://srkgolf.com/?post_type=product&p=2552 The Dynacraft Prophet Muscle Blade is all about extremes yet in a design where all the technology is hidden. First, this is a hollow-bodied design to move weight to the perimeters for exceptional forgiveness much like a hybrid. However, this multi-material design key feature is an ultra-thin, high-strength cup face to boost ball speed and maximum your distance. The weight saved in the face is positioned low and rearward for optimal launch conditions. Yet with all this technology this design maintains a traditional appearance and feel in an ultra-game improvement design for golfers of all abilities.

FLEX YOUR MUSCLE

The Dynacraft Prophet Muscle Blade is all about extremes yet in a design where all the technology is hidden. Yet with all this technology this design maintains a traditional appearance and feel in an ultra-game improvement design for golfers of all abilities.

FLEXFACE TECHNOLOGY

A hollow-bodied design moves weight to the perimeters for exceptional forgiveness much like a hybrid.

LOW CG

The weight saved in the face is positioned low and rearward for optimal launch conditions.

Specifications

Model # Hand Club Loft Lie Weight Offset Bounce Std Length Hosel ID
IH3732B-004 RH #4 21° 61° 249 3.2 mm 3° 38.5″ 0.370″
IH3732B-005 RH #5 24° 61.5° 256 2.9 mm 4° 38″ 0.370″
IH3732B-006 RH #6 27° 62° 263 2.6 mm 5° 37.5″ 0.370″
IH3732B-007 RH #7 31° 62.5° 270 2.3 mm 6° 37″ 0.370″
IH3732B-008 RH #8 35° 63° 277 2.0 mm 7° 36.5″ 0.370″
IH3732B-009 RH #9 40° 63.5° 284 1.7 mm 8° 36″ 0.370″
IH3732B-10P RH PW 45° 64° 291 1.4 mm 9° 35.5″ 0.370″
IH3732B-15A RH GW 50° 64° 291 1.4 mm 10° 35.5″ 0.370″
]]> Acer XV Iron Clubhead https://srkgolf.com/product/acer-xv-iron-lh-clubhead/ Wed, 06 May 2020 14:17:22 +0000 https://srkgolf.com/?post_type=product&p=2551 The standard XV is designed to fit the broadest range of golfers and instill confidence into their game. Features ample offset to help the player square up the face at impact and the enhanced heel-toe weighting enables players to hit both straighter and more solid shots.

INSTILL CONFIDENCE INTO YOUR GAME

The Acer XV irons available in 3 models: The XV standard version features ample offset to help player square up the face at impact. The HT has nearly a 30% wider sole and offer more forgiveness. The XV Pro has a more compact design, and reduced offset favored by better players.

EXTRA FORGIVENESS

Deep undercut cavity and enhanced heel-toe weighting provides more forgiveness on off-center shots.

TAKE AIM AT THE FLAG

The longer blade length and ample offset enables golfers to hit both straighter and more solid shots.

Specifications

Model # Hand Club Loft Lie Weight Offset Bounce Std Clublength Hosel ID
I3716A-004 RH #4 23° 61° 249 7.5 mm 0° 38.5″ 0.370″
I3716A-005 RH #5 26° 62° 256 7 mm 0° 38″ 0.370″
I3716A-006 RH #6 29° 62.5° 263 6.8 mm 1° 37.5″ 0.370″
I3716A-007 RH #7 33° 63° 270 6.5 mm 2° 37″ 0.370″
I3716A-008 RH #8 37° 63.5° 277 6 mm 3° 36.5″ 0.370″
I3716A-009 RH #9 41° 64° 284 5.5 mm 4° 36″ 0.370″
I3716A-10P RH PW 45° 64° 291 5 mm 5° 35.5″ 0.370″
I3716A-15A RH GW 50° 64° 291 4.8 mm 5° 35.5″ 0.370″
I3716A-20S RH SW 55° 64° 298 4.5 mm 12° 35.25″ 0.370″
IL3716A-004 LH #4 23° 61° 249 7.5 mm 0° 38.5″ 0.370″
IL3716A-005 LH #5 26° 62° 256 7 mm 0° 38″ 0.370″
IL3716A-006 LH #6 29° 62.5° 263 6.8 mm 1° 37.5″ 0.370″
IL3716A-007 LH #7 33° 63° 270 6.5 mm 2° 37″ 0.370″
IL3716A-008 LH #8 37° 63.5° 277 6 mm 3° 36.5″ 0.370″
IL3716A-009 LH #9 41° 64° 284 5.5 mm 4° 36″ 0.370″
IL3716A-10P LH PW 45° 64° 291 5 mm 5° 35.5″ 0.370″
IL3716A-20S LH SW 55° 64° 298 4.5 mm 12° 35.25″ 0.370″
]]> Acer XV Tour Blade Iron Clubhead https://srkgolf.com/product/acer-xv-tour-blade-iron-rh-clubhead/ Wed, 06 May 2020 14:09:23 +0000 https://srkgolf.com/?post_type=product&p=2543 The Acer XV Tour Blade is geared for golfers who are seeking maximum shot control or the ability to work the ball, while constructed from 304 stainless steel rivaling that nice soft, solid feel of a forged iron. These can be mixed and matched seamlessly with the Acer XV Pro to make the perfect blended set for the skilled player who may still need some help in the longer irons.

THE FEEL OF FORGED

The Acer XV Tour Blade is geared for golfers who are seeking maximum shot control or the ability to work the ball.

SHOW SOME MUSCLE

Solid muscleback provides more workability, penetrating ball flight and a forward CG.

CONTROL YOUR SHOT

The Acer XV Tour Blade is constructed from 304 stainless steel rivaling that nice soft, solid feel of a forged iron. Reduced offset, thinner topline and shorter blade length preferred by better golfers.

Specifications

Model # Hand Club Loft Lie Weight Offset Bounce Std Clublength Hosel ID
I3723C-004 RH #4 23° 60.5° 249 3.0 mm 3° 38.5″ 0.370″
I3723C-005 RH #5 26° 61.5° 256 2.8 mm 4° 38″ 0.370″
I3723C-006 RH #6 29° 62° 263 2.6 mm 5° 37.5″ 0.370″
I3723C-007 RH #7 33° 62.5° 270 2.4 mm 6° 37″ 0.370″
I3723C-008 RH #8 37° 63° 277 2.2 mm 7° 36.5″ 0.370″
I3723C-009 RH #9 41° 63.5° 284 2.0 mm 8° 36″ 0.370″
I3723C-10P RH PW 45° 64° 291 1.8 mm 9° 35.5″ 0.370″
I3723C-15A RH GW 50° 64° 291 1.6 mm 10° 35.5″ 0.370″
I3723C-20S RH SW 55° 64° 298 1.4 mm 12° 35.25″ 0.370″
]]> Acer XV Hybrid Clubhead https://srkgolf.com/product/acer-xv-hybrid-lh-clubhead/ Wed, 06 May 2020 12:11:40 +0000 https://srkgolf.com/?post_type=product&p=2542 The Acer XV hybrids feature cup-face construction or where part of the faceplate wraps around and becomes incorporated into the sole, crown and skirt area of the head. This pushes the weld back away from the actual face so the areas around the perimeter could be made thinner creating more face deflection for higher ball speeds to areas other than the center of the face. Even when you miss-hit the ball, the XV with cup-face technology provides you that extra spring-like effect for longer shots. These also feature the same Power Chamber as the matching driver. In addition, these low profile heads coupled with the Gravity Port moved toward the face promotes a higher launch with lower spin. Stock screw is 7 grams and requires 4mm Allen wrench.

ULTRA FORGIVING

The Acer XV hybrids feature cup-face construction, creating more face deflection for higher ball speeds to areas other than the center of the face.

GRAVITY CONTROL

Also feature the same Power Chamber as the matching driver. In addition, these low profile heads coupled with the Gravity Port moved toward the face promotes a higher launch with lower spin.

CUP-FACE TECHNOLOGY

Even when you miss-hit the ball, the XV with cup-face technology provides you that extra spring-like effect for longer shots.

Specifications

Model # Hand Club Loft Lie Weight Offset Volume Std Clublength Hosel ID
FIWC1264-003 RH #3 19° 59.5° 237 -4.5 mm 110 cc 40″ 0.370″
FIWC1264-004 RH #4 22° 60.5° 244 -5.5 mm 105 cc 39.5″ 0.370″
FIWC1264-005 RH #5 25° 61.5° 251 -6.5 mm 100 cc 39″ 0.370″
FIWCL1264-003 LH #3 19° 59.5° 237 -4.5 mm 110 cc 40″ 0.370″
FIWCL1264-004 LH #4 22° 60.5° 244 -5.5 mm 105 cc 39.5″ 0.370″
FIWCL1264-005 LH #5 25° 61.5° 251 -6.5 mm 100 cc 39″ 0.370″
]]>